Announcement

Collapse
No announcement yet.

Threshold Pot doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carl-NC
    replied
    Originally posted by h9361 View Post
    After a lot of trying, i found a 32R-0.25W speaker in my country, is it OK?
    You can try it but I doubt this will solve your problem. You have something wrong with your circuit. You should be able to drive an 8-ohm speaker and if you cannot then you probably can't drive a 32-ohm speaker, either.

    Leave a comment:


  • h9361
    replied
    Originally posted by kt315 View Post
    close R10 by wire jumper and try to get working board.
    Thanks

    Leave a comment:


  • kt315
    replied
    close R10 by wire jumper and try to get working board.

    Leave a comment:


  • h9361
    replied
    Originally posted by surfdetector View Post
    I made the Hammerhead 1 with the VCO option and had no problems with the circuit as designed. I used 32 ohm headphones.
    Thank you.
    I have a question about R10. Suppose that i have not connected coil to unit, is it possible to burn R10 or IRF740 if i touch pin-coil of unit?

    Leave a comment:


  • surfdetector
    replied
    Originally posted by h9361 View Post
    Dear Surfdetector, since you have tested HH1 with 32R speaker, do you think 32R-0.25Watt can work?
    I made the Hammerhead 1 with the VCO option and had no problems with the circuit as designed. I used 32 ohm headphones.

    Leave a comment:


  • h9361
    replied
    Originally posted by kt315 View Post
    i do not know your state be cause you do not want to fill a profile.
    OK, i will fill my profile.

    Leave a comment:


  • h9361
    replied
    Originally posted by surfdetector View Post
    Dear Surfdetector, since you have tested HH1 with 32R speaker, do you think 32R-0.25Watt can work?

    Leave a comment:


  • kt315
    replied
    i do not know your state be cause you do not want to fill a profile.

    Leave a comment:


  • h9361
    replied
    After a lot of trying, i found a 32R-0.25W speaker in my country, is it OK?

    Leave a comment:


  • h9361
    replied
    Thanks, but buying from china takes a long time to arrive.

    Leave a comment:


  • kt315
    replied

    50 Ohm!

    Leave a comment:


  • surfdetector
    replied
    Originally posted by kt315 View Post
    i can find 50R speaker in chinese e-shop. by two clicks.



    32 ohm

    Leave a comment:


  • kt315
    replied
    i can find 50R speaker in chinese e-shop. by two clicks.

    Leave a comment:


  • h9361
    replied
    Thanks, do you think 32R can work over HH1? I'm trying to find such speaker.

    Leave a comment:


  • kt315
    replied
    you need basic electronics course? nobody here is not academic, we are just beginners.
    use a transformer. get a current on the speaker converted from input voltage.
    please read the books related electronics more.

    Leave a comment:

Working...
X