Voodoo Main Discussion

[surfdetector]

I had purchased mine from Kellyco, but it might have been the last one in stock when I bought it.

https://www.kellycodetectors.com/15-...earch-coil-f75

[MartinB]

I had purchased mine from Kellyco, but it might have been the last one in stock when I bought it.

Thank you.
Yes it looks like you bought the last one as this coil is now out of stock. Unfortunately, KellyCo do not ship to the UK either. Guess I will just have to build on to their spec. Could you send me dimensions please.

[MartinB]

https://www.kellycodetectors.com/15-...earch-coil-f75

Thanks Surfdetector.

[reiv]

Has anyone who built Voodoo with succes, can put any video showing how it performes for example on different targets, how deep is with disc on the field, how accurate disc is etc. ?

Regards

[Matt_Rowe]

is that fisher coil a vlf coil, or pi coil, or does it matter, i went to the link and couldnt see it in the specs
never mind i just looked up the model on net, how do you delete posts

[surfdetector]

is that fisher coil a vlf coil, or pi coil, or does it matter, i went to the link and couldnt see it in the specs
never mind i just looked up the model on net, how do you delete posts

Matt there is information regarding the F75 coil on pages 70,71 and 75 of the book.
Cheers

[Matt_Rowe]

Matt there is information regarding the F75 coil on pages 70,71 and 75 of the book.
Cheers

thanks

[yukondave]

So I ordered the book, it'll be here Saturday. I ordered the PCB and it should be here in a few weeks.

I started looking for parts at DigiKey, Mouser and Newark but they are all showing the PIC18F4520 as backordered with delivery mid to late 2022. Being in Canada I have limited vendors that will ship to me. Anyone here know of a source for the PIC?

Also, is there a list of components on here somewhere? I'd like to start sourcing everything in case of other shortages.

Thanks.

[Carl-NC]

Futurlec has them:

https://www.futurlec.com

[surfdetector]

So I ordered the book, it'll be here Saturday. I ordered the PCB and it should be here in a few weeks.

I started looking for parts at DigiKey, Mouser and Newark but they are all showing the PIC18F4520 as backordered with delivery mid to late 2022. Being in Canada I have limited vendors that will ship to me. Anyone here know of a source for the PIC?

Also, is there a list of components on here somewhere? I'd like to start sourcing everything in case of other shortages.

Thanks.

You might be better off just doing the Arduino version of the Voodoo and then you won't have to worry about the PIC.
Cheers

[MartinB]

So I ordered the book, it'll be here Saturday. I ordered the PCB and it should be here in a few weeks.

I started looking for parts at DigiKey, Mouser and Newark but they are all showing the PIC18F4520 as backordered with delivery mid to late 2022. Being in Canada I have limited vendors that will ship to me. Anyone here know of a source for the PIC?

Also, is there a list of components on here somewhere? I'd like to start sourcing everything in case of other shortages.

Thanks.

I have a spare one I could post to you.

[Qiaozhi]

Also, is there a list of components on here somewhere? I'd like to start sourcing everything in case of other shortages.

Thanks.

The component parts list is here -> The Voodoo Project - Published October 2020

[yukondave]

Ah, the elusive "page 1" I've been searcing for, Thank you.

[yukondave]

I have a spare one I could post to you.

Thanks for the offer, I ordered one from Tayda and it will be here in 7-60 days.

[surfdetector]

Thanks for the offer, I ordered one from Tayda and it will be here in 7-60 days.

As I stated above, you might want to seriously consider doing the Arduino version of the Voodoo project. At least read through the pdf that describes the modification and you can do away with the PIC
Cheers