Announcement

Collapse
No announcement yet.

felezjoo PI(the best pulse induction metal detector that I made until now)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ivconic
    replied
    BTW... EXCLUSIVE!
    Audio you hear on video is coming from speaker taken from faulty ... iPhone6 !!!!

    It is small and narrow, closed in tiny box. Very easy to include on front panel, very loud tough!

    Leave a comment:


  • ivconic
    replied
    It is operated on 12V not on 18V.
    Trick is to replace R19 with 13k resistor and that's how code in Atmega is fooled to accept 12V supply without any problems.

    Leave a comment:


  • ivconic
    replied
    Little bit of trimming and small coil can work nice!
    Debug numbers are close to good:


    Leave a comment:


  • chafik
    replied
    hey PIGEON this is a link you should use for Usbasp driver http://andybrown.me.uk/2010/11/14/us...bit-windows-7/
    for more description you can go to avrfreaks forum the some thing can be done for mk2 programmer from atmel
    the atmel driver had no signature needed by windows to be accepted in the link you will see a full description great work from Andy Brown
    you can get the file here

    Leave a comment:


  • basellafe
    replied
    i want to ask abaut coil what is best spider coil or mono and wire shuold it be litz becuose letz have more ohm

    Leave a comment:


  • mohammadreza1100
    replied
    Thank u toros

    Leave a comment:


  • Toros
    replied
    Am I to understand that with finger you connected the drain of IRF840 to grund or any other element of the scheme. I do not know what you've done but it is possible to be burned IRF 840 or even CPU (ATMega).

    Leave a comment:


  • mohammadreza1100
    replied
    Thank u toros.i found the problem.after the first sense it countinued even i take far the metal target.and when i touch the cable junction to the board woth my finger it goes off.i use coaxial cable without foil.what is the problem?
    Thanku again toros

    Leave a comment:


  • Toros
    replied
    You will not lose anything

    Leave a comment:


  • mohammadreza1100
    replied
    Hello qiaozhi and ivonic.please help me.if i do not shield the felezjoo loop what advantage i will lost?
    Thank u.

    Leave a comment:


  • seadoggy
    replied
    Originally posted by ripsdevala View Post
    Felezjoo is not all terrain detector, maybe the author is live without volcanic area which is perfect for fejo, in my place with full vulcanic area is imposible, except on the beach (with no iron sand) and clay ground that i already test.


    Is it good at normal terrain??

    Leave a comment:


  • ripsdevala
    replied
    Originally posted by heyran View Post
    felezjoo isn't good as it sound ... only a simple pi md with poor stability in real soil...
    Originally posted by aroma View Post
    Im agree with you heyran Its rubbish...
    Felezjoo is not all terrain detector, maybe the author is live without volcanic area which is perfect for fejo, in my place with full vulcanic area is imposible, except on the beach (with no iron sand) and clay ground that i already test.

    Leave a comment:


  • jladre
    replied
    Originally posted by basellafe View Post
    Jladre what should i do to make felezjoo work with 12 volt without problems
    Look to my post at post #1245.

    Leave a comment:


  • jladre
    replied
    Originally posted by aroma View Post
    Im agree with you heyran Its rubbish...
    It is rubbish becausevyou cannot make it work right... The problem is you not the design.

    Leave a comment:


  • aroma
    replied
    Im agree with you heyran Its rubbish...

    Leave a comment:

Working...
X