Delta Pulse

[kt315]

last lines on the portrait

[Geo]

Hi...

Thanks kt315 for your answer,

what are the best value of resistance and inductance for
coil of deltapulse ?
i think these two factor must be constant in any size of coil?
please help me about this...
thanks...zenit52

L must be 1000uH.
DC resistance must be between 2.5 and 4 Ohm at the pins of the connector

[zenit52]

What about resistance and inductance ?

Hi...

Thanks kt315 for your answer,

what are the best value of resistance and inductance for
coil of deltapulse ?
i think these two factor must be constant in any size of coil?
please help me about this...
thanks...zenit52

[kt315]

16 turns - for 1 m*1 m coil.
for 50*50 cm multiply 16 on TWO (1 m/50 cm=2) you get 16*2=32 turns.

[zenit52]

Please answer ...

hi everyone,

what is the best configurtion for 50*50 cm and 1*1 m coil of deltapulse ?
are two factor (resistance and inductance), just important for coil ?

let's me i repeat my question in this form:

what are the best value of resistance and inductance for
coil of deltapulse ?
i think these two factor must be constant in any size of coil?
please help me about this...
thanks...zenit52

[kt315]

look fixed DP & XR-71 generalized schematic!

[zenit52]

What is the best coil ???

hi everyone,

what is the best configurtion for 50*50 cm and 1*1 m coil of deltapulse ?
are two factor (resistance and inductance), just important for coil ?

let's me i repeat my question in this form:

what are the best value of resistance and indutance for
coil of deltapulse ?
i think these two factor must be constant in any size of coil?
please help me about this...
thanks...zenit52

Hi,
please guide me about this,
in deltapulse schematic what are these points?
thanks...zenit52

the points are to connect the meter

[zenit52]

What are these points?

Hi,
please guide me about this,
in deltapulse schematic what are these points?
thanks...zenit52

[zenit52]

FIXED DeltaPulse SCHEMATIC ?!!!

Hi kt315
i see your new fixed deltapulse schematic...
did this fixed schematic is better than older? in performace and depth ?
i want build a good MD for best depth... did deltapulse is good for building or you have a better idea? please guide me ...
thanks...zenit52

[kt315]

fixed again. connect capacitor what you have of amount. it is not principialy but take it on maximum. you mean probably C30 & C31.

Hi KT315, i build deltapulse and work very well (mounting plain of elbombaci alt_yol.pdf, yerlesim.pdf, renkli.pdf). I see your new schematics but i dont see the big electrolitic capacitor of 10.000 microfarad. were is it?
excuse my english

[kt315]

uuups! SORRY THAT I DID NOT FIX THE TIMES!!! I was thinking it is not so principially, but see you are so agressive I fixed it!
i give also right schematic.

[zenit52]

Please help me ...

Hi everybody,

I am a beginner in this site... at first i am sorry for my bad english,
and thanks from this site's users about this good site ...

I search and find DeltaPulse, is good PI MD for building,
Please help me about this:
i want build a MD for more depth at first, and discrimination is in the second step for me ...
Is there a better PI MD from Deltapulse, for building ? if there is, please introduce it to me ...
Thanks...

[Geo]

Hi Geo
How are u this days?I made my DP finally.i have some questiones around it.
pls guide me.
1-i am looking for Medium size gold objects(Small dish,cup.small jar and etc...),How
and where must i tune DP?(i mean time of delay,frecuency and in which points?)
2-How can i change some elements of DP for best depth and sensetivity for my purpose?
3-my DP Coil has alminium shield(Network Cable),where connect it?
4-Another DP,which detector is good for make for my purpose?
sorry for bad english
Thanks for ur help and goodluck

Hi. Lets see!!!!!
1.Every pot has a scale from 1 (min resistance) to 10 (max).
So Noise must be between 3 and 6 ( no big dif..).
Gain must be to 6 ... 7 ( maybe 6.5 is the max)
Signal 1... 2
sens > 5
TRSHOLD i like to 10 ( where do you like and how do you have conected the wires).
2. I dont know, but If the objects are big and you use a large coil then a 24v at the mosfet is better
3. No problem... at +E, -E or gnd.
4. Who is your purpose????
Regards