Delta Pulse

[Nicolas]

hi my friend look at this video
http://www.youtube.com/watch?v=-38M2R-3U-o

Hi ouiarabe

Good work my friend charchabil .......good luck and forward

Cordially nicolas

[ouiarabe]

I did not use PIC16F676,however the code works fine,displays battery voltage and signal strength.

hi my friend look at this video
http://www.youtube.com/watch?v=-38M2R-3U-o

[Nicolas]

Hi! Nicolas did you solved the problem of your LCD discrimination? what programmer you,re using? I have the same problem,.

Hi Saromines Ramiel

Yes I Have resolved that... I use programmer type PICkit 2 v2.61

But not again stable with frame 1x1m. it's ok with coil 40cm

A remark to not: put potentiometer to determine the value of RX. So that the program is displayed on the screen.

Best time

Nicolas

[maximusdesmus]

I did not use PIC16F676,however the code works fine,displays battery voltage and signal strength.

[maximusdesmus]

excuse me my friend I did not pay attention your circuit discrimination with PIC16F676

what is this supposed to mean?
what discrimination are you talking about?

[Orbit]

hekskod wrong !!!!!!!!!!!!!can not be resolved Turkish business !

[RS_Phil]

Hi! Nicolas did you solved the problem of your LCD discrimination? what programmer you,re using? I have the same problem,.

[ouiarabe]

Hmm,the lcd is 2X16, the flat cable goes only to the one pinned side.
Why did you suggest me that?

excuse me my friend I did not pay attention your circuit discrimination with PIC16F676

[maximusdesmus]

HI maximusdesmus
change the lcd 1X16 by 2X16

Hmm,the lcd is 2X16, the flat cable goes only to the one pinned side.
Why did you suggest me that?

[alonejax]

very very very thanks porkluvr
i get many your time....
i wish happy time for you and i can make up for your oblige
i think in your guide and come back again my friend

[alonejax]

hello again kt315
i'm sorry if i bugging you for privet massage
i only want you help me, excuse me !
i want to build a good gold detector for dept
if you help me i so thanks
Good luck!

[ouiarabe]

HI maximusdesmus
change the lcd 1X16 by 2X16

[alonejax]

hi jap
thanks bro
i change that for test,
jap, can you help me to build nice gold detector please ?

[jap]

are your end of damping resistor that resistor other side irf840 fet?

Hi alonejax
-U entered into a problem using another number
U use irfp460,,,If U returned to the original number may get rid of the problem,
-The original is IRF740 or 840------>Must be tested by the first.
best time
j.

[zlatica]

Thanks