Delta Pulse

[mohandes]

Orbit we wait for you

[Sneshko]

please put here Orbit.

check it Sneshko
http://www.thunting.com/smf/pi_desig...-t19922.0.html

Very good dear mohandes!
Thank you!
Regards from Serbia!
Sneshko

[mohandes]

You can try and in Serbia FULL hexscod without limit, greeting !

please put here Orbit.

check it Sneshko

http://www.thunting.com/smf/pi_designs_deepseekers/delta_pulsexr71_lcd_modified_hex-t19922.0.html

[Orbit]

You can try and in Serbia FULL hexscod without limit, greeting !

[Sneshko]

O.K. mohandes!
Thank you very much!
Regards!
Sneshko

[mohandes]

Hi mohandes!
For Hex file for delta_2_2010_lcd_discrimination.rar you set - I have a few questions:

1. Is the Hex File Trial or unlimited version?
2. Does the Hex File for Turkish or English language?
3. Are you in this thread to post the complete scheme for the LCD with PIC18F252-E/SO from Delta Pulse 2?

Advance very grateful!
Regards!
Sneshko

hi
this is demo
i forgot but i think start detector write the name of turkey site and second line write 200 ( after 200 time on/off you should program again)
and then write battery and show signal
but i think it is not good for use. if you want can buy it turkey seller , he say me can send me 2 18f252 by 20euro to I ran
when i connect this voltage near 1volt Diminish and not well to use.
just keep it analog and use it.
another LCD file exist. i send here next time.( i do not make it yet)
excuse for my English

[Sneshko]

Hi mohandes!
For Hex file for delta_2_2010_lcd_discrimination.rar you set - I have a few questions:

1. Is the Hex File Trial or unlimited version?
2. Does the Hex File for Turkish or English language?
3. Are you in this thread to post the complete scheme for the LCD with PIC18F252-E/SO from Delta Pulse 2?

Advance very grateful!
Regards!
Sneshko

[mohandes]

Orbit hi
i program that you send here PIM 2.rar .program complete but dont work.
i erase it and program with this file see.but it is demo ( pcb was correct but program is not) , i need complete who is have it??
delta_2_2010_lcd_discrimination.rar
regards

[mohandes]

hi
my problem not solve.

pin 7 and 8 18f252 should connect together or no?

[mohandes]

hi
my problem not solve.

[mohandes]

The most important product of a creative mind is an invention.His ultimate goal
mastery mind over matter and the use of its forces for the needs of mankind .

thanks .sure , i agree with you
i certain red and green led in pic.red for nonferrous and green for ferrous.is ok?



please guide me for set it (TR1 & TR2)
regards

[Orbit]

The most important product of a creative mind is an invention.His ultimate goal
mastery mind over matter and the use of its forces for the needs of mankind .

[mohandes]

Again view connection between lcd and pic 18f252 !that quartz crystal use ?
attempt 10mhz !

i use 20mhz like pcb , ok i check pcb if dont ok ,i should use 10mhz!!!!
regards.
Orbit your version that you send me is completer than i send .

[Orbit]

Again view connection between lcd and pic 18f252 !that quartz crystal use ?
attempt 10mhz !

[mohandes]

the programmer use ?
Try PICkit- 2 , ver : 2v2.61 !

hi
see