Announcement

Collapse
No announcement yet.

Deepers Detector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • soylu
    replied
    hello MFC Depth is falling when I adjust the balance according to

    Leave a comment:


  • kt315
    replied
    you must remember this was not mine detector. it was given me for repair. testing is very cool.
    it has more strong cut-off than DP and works not like as DP. i think ground balance also needed upgrading, autobalance working good.

    Leave a comment:


  • sbalio1
    replied
    Kt315 . Thanks have you testing your deeper . What about result

    Leave a comment:


  • soylu
    replied
    If the coil resistance is 1.6 or 2.5, whichever is the best result

    Leave a comment:


  • kt315
    replied
    open my album http://www.geotech1.com/forums/album.php?albumid=91

    Leave a comment:


  • soylu
    replied
    hi kt315
    do you have a photo

    Leave a comment:


  • kt315
    replied
    ok. good way. he used my photo of the coil was been with DEEPERS 10DD in complect.
    but one thing you do not want to see... you can NOT put it in the tube.
    its IMPOSSIBLE. so thats only a intoxical fantazy of the writer.

    way must be - you take TWO pieces of the cable and put them in the tube. then you connect wire-to-wire in
    one chain.

    Leave a comment:


  • 6666
    replied
    In post #213 it shows all the instructions on the folded coil
    basicly you wind a round coil, then twist to make flat figure 8, then fold one side over the other


    В сообщении № 213 он показывает все инструкции на свернутой катушке, в основном вы наматываете круглая катушку, затем крутите, чтобы сделать плоскую фигуру 8, затем сложите одну сторону над другой

    Leave a comment:


  • kt315
    replied
    Originally posted by 6666 View Post
    Hmmm, ok just to avoid any confusion, the folded coil I am talking about is step 4 on the drawing in post # 213.


    If you follow all the steps 1-4, Step 4 (to me) shows a FLAT figure eight coil, folded over on its self to form an elliptical coil, what is the advantage of the folded coil over a normal bundle wind coil.


    In regard to pages 57-60 and the flat big foot coil, Does the folded eight coil ( elliptical) behave the same as a FLAT eight coil ?
    what is folded coil what is flat eight coil. give pics. take a mind we are NOT SPEAKING english to grasp
    what you mean -!

    Leave a comment:


  • soylu
    replied
    hello can you give MFC full coil values

    Leave a comment:


  • 6666
    replied
    Hmmm, ok just to avoid any confusion, the folded coil I am talking about is step 4 on the drawing in post # 213.


    If you follow all the steps 1-4, Step 4 (to me) shows a FLAT figure eight coil, folded over on its self to form an elliptical coil, what is the advantage of the folded coil over a normal bundle wind coil.


    In regard to pages 57-60 and the flat big foot coil, Does the folded eight coil ( elliptical) behave the same as a FLAT eight coil ?

    Leave a comment:


  • soylu
    replied
    deepers 8 is working
    you can

    Leave a comment:


  • Qiaozhi
    replied
    Originally posted by 6666 View Post
    What advantage does this folded elliptical coil have over normal bundle wind round coil ?
    See pages 57-60 of ITMD.

    Leave a comment:


  • kt315
    replied
    Originally posted by 6666 View Post
    What advantage does this folded elliptical coil have over normal bundle wind round coil ?
    what advantage does whites bigfoot have over normal coil? you ask like we are here all specialists from tesoro whites garrett minelab.

    let they pay us for their job asking on any idiotic question!!!

    Leave a comment:


  • LDTVN
    replied
    Originally posted by 6666 View Post
    What advantage does this folded elliptical coil have over normal bundle wind round coil ?
    I do not know, I have not done it yet.
    I have not yet decided to repeat Deepers 10DD or Deepers x5, which one is the best?

    Leave a comment:

Working...
X