Hi

[timekiller]

Mine SMW is ready. Very deep, 1 euro coin about 45-50 cm. But discrimination is very bad. It eliminates ferromagnetic metals, but the depth of the non-ferrous metals also drops significantly. I experimented with TL084 LF347 LM324.... TX is 0.8 mH DD from elliptic coil from old project. I can't download less than 10 kHz because the work is inadequate poor .
There is probably something I need to do to improve discrimination.

[kt315]

what you used for shielding? kitchen foil? sattelite cable foil?

[timekiller]

N77 Spray Graphite , this is the best in my opinion. But at the moment it is not connected, the board is on the work table and I am working on it

[Hach]

Thanks God I get the first sign of life
The board looks terrible I know
But it's working and I get first beeb tomorrow I think still a lot of something to do with
Thanks ivconic I hope I can configure it as well

[Qiaozhi]

The board looks terrible I know

If you don't want to use a PCB, then a better alternative than protoboard is to use stripboard (Veroboard). You can design the layout easily with VeeCAD.
https://veecad.com/index.html

[kt315]

George
he has to learn LUT technology. that is simple way, does not waste money and get good result. then he will do any project having just black-white pcb picture.
sorry i do not know similar videos in english sector because do not know the name of it in english.
https://www.youtube.com/watch?v=NJTeIALlztI

[Hach]

Thanks guys for your advice.
I have questions.
I test the board and its work and there is a detection to 5cm only but my battery so week it's read on multimeter 6v also I get continuous beeb is it because low voltage?
I will be very happy if Ivconic put configuration processes in step by step
Thanks again for supporting

[ivconic]

No such thing.
Especially not for 6v power supply and perfboard mess.

[kt315]

Hach write pls your country in profile. let to see your native. i see you want to be poorer by poorest.
my county is Lietuva with 3 mln inhabitans, but really here is 2, not more. Lietuva is fascist state because they prohibit to use
different languages - polish, russian, belarusian.

[Hach]

Hach write pls your country in profile. let to see your native. i see you want to be poorer by poorest.
my county is Lietuva with 3 mln inhabitans, but really here is 2, not more. Lietuva is fascist state because they prohibit to use
different languages - polish, russian, belarusian.

I live in Jordan
Native language is Arabic

[kt315]

thank you. i see 9.7 mln inhabitans and good growth of your people.

[Hach]

No such thing.
Especially not for 6v power supply and perfboard mess.

Isn't thes enough to say that board is working and give me support!!?
shared a video with you from the Flickr app! Check it out:
https://flic.kr/p/2itrSg7

[Hach]

thank you. i see 9.7 mln inhabitans and good growth of your people.

Third world countries like you see same as lietuva

[gurdal]

hello ivconic,
Are there 2 tones and pinpointer in the circuit?
If you have, can you send a video link to private?
Yours truly

[Hach]

Hello ivconic
Its really work perfect in air test I get 50cm cola can
Big iron like tea pot more than 50cm
Wedding silver ring 20cm
Coin 10mm 20cm
Gib discriminate only iron coin not all iron
TV ferrite can't be discriminate
I test it inside room where electronics and wireless also the ground have iron in it but it's not quite at all when I face it on the ground so noise, dos this noise vanish outside?
Also I afraid I don't connect coaxial TX and Rx in it's terminal plase look at attached image and tell me where should I connect to.