IDX-PRO+VDI

[paku]

haha sometime we must have joke bro,
so dont make self angry bird hehe


I Will Make It Now
And What is connection for ( + 8V - )

Thanks BOS

[Davor]

so you are still joking
U103 contains two devices, and you need both outputs to feed your VDI.

[paku]

On Schematic TGSL EDU have U103A and U103B so witch one of that

[paku]

Ok i Will Try That pins 7 (x) and 1 (y) of U103.

so at the VDI board have + 8V - must connect to battery or board on TGSL

[Davor]

You can try pins 7 (x) and 1 (y) of U103.

[paku]

This is IGSL not TGSL
the IC is different

[onuba]

ivconic can you help!
how to connect VDI to TGSL EDU Board

[paku]

...

ivconic can you help!
how to connect VDI to TGSL EDU Board

[dfbowers]

Hello, I have purchased IDX PCB from Silverdog, looking forward to putting it together. There is so much information to read my head is hurting. Has anyone added the Mr Bill mods?

Build the kit as is.. If you lack sensitivity replace the supplied LM324 with an LF347.

[tonyh]

Hello, I have purchased IDX PCB from Silverdog, looking forward to putting it together. There is so much information to read my head is hurting. Has anyone added the Mr Bill mods?

[pepe]

I guess: 7805 and lm317

[sinclairuser]

two fets facing each other?

[paku]

can anyone explain what is in that picture

[Nicolas]

Hi all and dfbowrs

When I can find the software or Hex file?

http://www.youtube.com/watch?v=5j_XM0L0BKg

[pepe]

I built IDX and after removal of short circuit (there was some fun to be found ) works ok.