IDX-PRO+VDI

[gaby_sult]

[ossamaussama]

First time I have seen this. Will it ground balance ferrite.

yes it can reject frite in all metal and discrimination mode

i change rx capacitor and still have the problem with large copper target

small coin can be detected very near the coil\
but large bronze coin can be detect only if it 5cm to 35 cm
not less not more

is it saturation problem in amplifer stage ?
is it normal?
in all metal ( pin point ) it can detect large copper very near the coil

[CDI]

i see very archaic russian word "desno" that means (AT) RIGHT. "desnitsa", is right nand in russian forgotten. what your native? what country you are from? where you got this chematic from which forum?

Word "desno" is serbian, it means "right", and this schematic is from Serbian hobidetektori forum. Second thing - this schematic is for Whites Classic 3, not for IDX.

[Koala]

Hi all

Why my idx cannot detect coin when it is near the coil but can detect at 35 cm

First time I have seen this. Will it ground balance ferrite.

[kt315]

Hello. Who knows what the variable is used instead of a permanent control? The scheme specified by an arrow.[ATTACH]35124[/ATTACH]

i see very archaic russian word "desno" that means (AT) RIGHT. "desnitsa", is right nand in russian forgotten. what your native? what country you are from? where you got this chematic from which forum?

[gaby_sult]

Sorry for the language , but I have not yet figured out if the MD IDX pro 2 tones you've managed to make it work ?

if you follow the scheme and using potentiometer P7 go into discrimination (remove iron) surely you have two tones, just be careful PCB collector Q3.

Gaby.
http://www.geotech1.com/forums/attachment.php?attachmentid=35064&d=1454863990

https://www.youtube.com/watch?v=3q8EeLJC17Q

[dgm]

Sorry for the language , but I have not yet figured out if the MD IDX pro 2 tones you've managed to make it work ?

[Qiaozhi]

Mi dispiace che non ho ancora capito se sei riuscito a eseguire IDX con due toni, e se posso spiegarlo meglio. Grazie mille....

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

[dgm]

Mi dispiace che non ho ancora capito se sei riuscito a eseguire IDX con due toni, e se posso spiegarlo meglio. Grazie mille....

[gaby_sult]

Hello. Who knows what the variable is used instead of a permanent control? The scheme specified by an arrow.[ATTACH]35124[/ATTACH]

it's a mistake it is correct
Gaby

[ossamaussama]

Hi all

Why my idx cannot detect coin when it is near the coil but can detect at 35 cm

[Artyom]

Hello. Who knows what the variable is used instead of a permanent control? The scheme specified by an arrow.

[Koala]

Hi all
I have a qusetion which is better idx or tesero lobo

pretty much the same with most of these home built or factory detectors. IDX if built well will preform as good as most modern detectors if you use 0 discrimination. So on quite fields is one of the best.


However I have also built the Tesoro Bandido and this is my main goto detector because with enough discrimination to eliminate small nails and the IDX set the same it has a very slight edge.
Also the Bandido has true no motion all metal mode. Comes in very handy to tell the size and shape of objects and great around tree roots.


Not tried the Lobo so can't compare.

[gaby_sult]

For those interested here you have modified scheme IDX-Pro two tons.
Maybe it's someone younger to make a PCB for this scheme.
Gaby.

[gaby_sult]

With much patience I understand how it works Circuit 2 tons which no one has mentioned it appears then the second tone.
Here is change IDX-2ton board, but to enter the two tones have intervened in P7 (discrim.) as though eliminate iron.

Gaby