Delta Pulse

[mohandes]

Hello everyone..i made one sided pcb board and that is working now.,my problem is im suffering a very low detection it only detect a 4x6 inches metal plate in 60 cm.. im using 45cm diameter coil with 940uH and 3.2 ohm and another coil is 30 cm, 435uH, 3 ohm.. what would be the cause of this problem?? ( i believe the board is working.

hi
if all is ok and all pot in max position so you should detect that in near 80 to 100cm by 45cm coil but parameter not good .please test it outdoor and not in home(better).can you tell us about damping R??.and your 30 cm coil is correct and better than 45cm.try all coil between 400 to 500mkh and 2 to 4 ohm(3to4 ohm more better) and with this 30cm coil detecting in 60cm well.

[jladre]

Hello everyone..i made one sided pcb board and that is working now.,my problem is im suffering a very low detection it only detect a 4x6 inches metal plate in 60 cm.. im using 45cm diameter coil with 940uH and 3.2 ohm and another coil is 30 cm, 435uH, 3 ohm.. what would be the cause of this problem?? ( i believe the board is working.

[mohandes]

Hi mohandes! I cannot open your file..i just want to know if your single sided pcb isthe same with the one on teknolojiekibi.com mark with 26.08.07 Duzenleme: 02.

try by this my friend
Sprint-Layout60_Viewer.exe
search in net and download it

[jladre]

hi
[ATTACH]32307[/ATTACH]

Hi mohandes! I cannot open your file..i just want to know if your single sided pcb isthe same with the one on teknolojiekibi.com mark with 26.08.07 Duzenleme: 02.

[jladre]

Tnx

[mohandes]

Thank you mohandes.. i smell that i can made a delta pulse sooner

hi
soncorr.rar

[jladre]

yes . in turkey site and i think is free(i make it and correct). i put for you next time. regards

Thank you mohandes.. i smell that i can made a delta pulse sooner

[mohandes]

yes . in turkey site and i think is free(i make it and correct). i put for you next time. regards

[jladre]

Hi everyone! Is there a one sided pcb for delta pulse? If yes, can i ask a copy of it?

[mohandes]

Can you tell me the cost plus shipping of full version hex and Micro Con. here in Philippines?

hi.so sorry i forgot to answer this.say me for one 21euro by shipping.
regards

[mohandes]

Can you tell me the cost plus shipping of full version hex and Micro Con. here in Philippines?

see it for adjust

https://www.youtube.com/watch?v=RGocN4qcjBQ

and help more:

http://www.teknolojiekibi.com/yeni/index.php?topic=3312.0

http://www.thunting.com/smf/metal_detectors/pulse_delta_2_with_circuit_discrimination-t28731.0.html

[RS_Phil]

Can you tell me the cost plus shipping of full version hex and Micro Con. here in Philippines?

[RS_Phil]

hi
the answer:
hi,
I think that there is some problem on your circuit. Also, discrimination must be good. But this bad working is not about demo. This is about your circuit. We are using paypal for money transfer but if you want bank transfer, we can use.

Nothing wrong with the circuit may be adjustments I suspected the quality of parts I used. some example in LCD circuit that need precise adjustment is here..

[mohandes]

Ok thanks Mohan..

hi
the answer:
hi,
I think that there is some problem on your circuit. Also, discrimination must be good. But this bad working is not about demo. This is about your circuit. We are using paypal for money transfer but if you want bank transfer, we can use.

[paku]

[ATTACH]32290[/ATTACH]
for Paku. and another friend.

Thanksfull For Share Bro