Delta Pulse

[pigeon]

Hi pigeon
try
best time


j. [ATTACH=CONFIG]22487[/ATTACH]

hi Jap

I try this


thank you very much

best time

P.

[kt315]

Hi pigeon
try
best time
j. [ATTACH=CONFIG]22487[/ATTACH]

pls give a password on the ZIP. tia

[jap]

PCB for this [ATTACH]22468[/ATTACH]

Hi brabra
Yes there is its PCB,Each scheme has pcb.[He is here and shortly search will find it].
best time
j.

[jap]

Hi pigeon
try
best time
j. chargeur%.zip

[pigeon]

lm317

hi all

a have this charger schematic i have all components except L200 can i replace with LM317.how ?

thank you

best time

P.

[szucs_g]

I look the scematic of EXTRA_PIC. I was made this and use with an original PC serial port. With USB-Seriel adapter don't work!!!!! (this adapter not take an +5 and +12,5 volt)

[brabra]

PCB for this

[pigeon]

Here's a good charger for 12V lead acid battery http://talkingelectronics.com/projec...er-12vSLA.html

hi

have a pcb please?

thank you

best time


P.

[brabra]

Hi brabra
-U hardware EXTRA-PIC it from the family of jdm programmer It does not succeed in family programming pic18fxxx ,Last attempt with PICPgm program if it fails , use Pickit2,or clon It successful.
best time
j.

Hi Jap
I programmed with EXTRA-PIC

http://www.2shared.com/document/QKFix8xf/ПРОГРАММАТОР_EXTRA-PIC.html

[maikl]

HI ALL

is that I can use a pc charger to charge directly 12V lead acid battery?

thank you best time

P.

Here's a good charger for 12V lead acid battery http://talkingelectronics.com/projec...er-12vSLA.html

[Jose]

Hello Paloma
To charge a battery, you need a higher voltage than the nominal voltage of the battery.
For lead acid batteries of 12 volts, you need a charger that delivers 16 volts or more.
Then, an electronic circuit or a series resistance, regulating the charging current, usually 10% of the battery capacity.
A lead acid battery of 12 volts, can reach 13.6 to 13.8V when fully loaded.
Power PC, delivered 12,5 volts, thus not useful for this application.
José

[jap]

Hi brabra
-U hardware EXTRA-PIC it from the family of jdm programmer It does not succeed in family programming pic18fxxx ,Last attempt with PICPgm program if it fails , use Pickit2,or clon It successful.
best time
j.

[jap]

Hi pigeon
-For charging use an ac adaptor 12V-1A ,,,pc PS not use for charge!
best time
j.

[pigeon]

HI ALL

is that I can use a pc charger to charge directly 12V lead acid battery?

thank you best time

P.

[brabra]

I use winpic800 software and hardware EXTRA-PIC,but i do not know how to set fuses bit