TESORO GOLDEN SABRE

[dbanner]

Kt315, you hit to the nail on the head. I very been trying to do hiearchical sheets on Diptrace, I figured that once you're in the fire there's no turning back.

[dbanner]

Either you are totally deadly drunk... either you using some heavy drugs... either you are in terminal phase of some incurable illness.
---
super drooper megadeath high technology ground penetrator radar.
https://www.youtube.com/watch?v=Hblt...58IqgGN4AaABAg

All of the above. Megadeth.... Holy wars. First mistake ,last mistake.....no more mistakes.
Dave mustain. Heck of a guy. With Marty Friedman, rust in piece.

[dbanner]

Yes , I did have one too many. Spanish castle magig, Jimi Hendrix.
My apologies to you.
I've been given a notice to move, you know, I'm a tenant.
Never the less, my name is David Christopher Nisbeth.
Thanks you guys, I love all of you.
Look in the trees, I smell humans.....General Ucko, planet of the apes.

[ivconic]

[kt315]

Either you are totally deadly drunk... either you using some heavy drugs... either you are in terminal phase of some incurable illness.
---
super drooper megadeath high technology ground penetrator radar.

https://www.youtube.com/watch?v=HbltgqAD7yE&lc=UgxC-Qans4AS58IqgGN4AaABAg

[ivconic]

You lost your way.
Either you are totally deadly drunk... either you using some heavy drugs... either you are in terminal phase of some incurable illness.
Now you became a forum spammer too?
Illiterate of course, just look your words and sentences!?
Qiaozhi will have lot of work to do here...
...
How many Tesoros did you make so far?
You mindless baboon! Mixing pears and apples.
0 volts residual voltage at Tesoro coil is 22 degrees shifted phase related to TX.
Majority of diyers here will not have tools and equipment to compare and measure the phase, so the residual voltage is everything they can rely on.
Instead of Copy&Paste somebody else's posts; you better stop with heavy drinking and try to make at least one simple metal detector.
How many Tesoro detectors did you make so far? Poor creature.

[dbanner]

I am here on forum, only i don't follow some old topics no more.
...
That's old post.
And nothing is wrong there.
I would write the same today.
Today i have good dual channel oscilloscope.
But in the past there were periods when i didn't have one, bad or good.
So i used multimeter to balance the coils.
Some people disagree with my methods. Alright.
What i used back than; was to get original coil and perform the same method of measurements, write down what i measured, keep those records as reminder or reference.
When making new coil; i need just to replicate what i have in my records, simple as that.
That's why my method was successful to me. My coils were correct.
But if you don't have original coil; you can monitor RX signal after the first opamp and try to achieve lowest output during the balancing.
Any method you find on forum is good enough. Anything works.
Of course i would agree; using oscilloscope is the most "regular" way.

What utter nonsense, a meticulous man as you were, you must be have rna breakdown ( aka alzieme)
Tesoro is not min output, rather, min out with 21.23 degrees phase shift with respect to TX.

[ivconic]

Ivconic is not here

I am here on forum, only i don't follow some old topics no more.
...
That's old post.
And nothing is wrong there.
I would write the same today.
Today i have good dual channel oscilloscope.
But in the past there were periods when i didn't have one, bad or good.
So i used multimeter to balance the coils.
Some people disagree with my methods. Alright.
What i used back than; was to get original coil and perform the same method of measurements, write down what i measured, keep those records as reminder or reference.
When making new coil; i need just to replicate what i have in my records, simple as that.
That's why my method was successful to me. My coils were correct.
But if you don't have original coil; you can monitor RX signal after the first opamp and try to achieve lowest output during the balancing.
Any method you find on forum is good enough. Anything works.
Of course i would agree; using oscilloscope is the most "regular" way.

[dbanner]

nothing attached

Sorry

https://worldradiohistory.com/UK/Electronics-Today-UK/80s/ETI_Jul_81.pdf

[6666]

Here is another scope beam switching unit circuit. This one uses only transistors, easy to construct and should do the business.

nothing attached

[dbanner]

Does this scope help me????

Here is another scope beam switching unit circuit. This one uses only transistors, easy to construct and should do the business.

[dbanner]

You can have 2 D's or 2 circles or even 2 squares if you wish.
---
sorry Delta Banner i must reminder that Tesoro design coils were NEVER '2 D's or 2 circles or even 2 squares'.
they were always classic planar. Tesoro was always kinda conservative. NO DATA on 2D coils, NOT EXISTING, people has to calculate THEMSELVES those data
and check themselves.

The parameters of the tesoro coils are well known.
Here's a tesoro stock widescan coil (2D) on the end of a tesoro royal sabre. Same filtering as the golden sabre. These coils came in two sizes, 8 inch and 11 inch.

https://www.google.com/search?q=tesoro+golden+sabre+widescan+coil&oq=tesoro+golden+sabre+widescan+coil&aqs=chrome..69i57j33.23407j0j7&client=ms-android-blu-rev2&sourceid=chrome-mobile&ie=UTF-8#fpstate=ive&vld=cid:cc747f68,vid:m_PH4U34Txo,st:0

tesoro зробив 2D котушки

[kt315]

divers? them two i meet

Novosibirsk now. -35 Celsius. -31 F https://www.youtube.com/watch?v=okbZz5QOHo4

[SWL]

Or Vytautas from Zarasais)))

[kt315]

take those two circles and put them around your neck.. and look for nearest ac wall plug.
--
we mean the (THE) filters in tesoro schematic, at very first. they sure had been calculated/made under a coil used.
just because the coil is always in moving above ground with the certain given speed.
if not - a niwbie gets a trouble, no depth! WHO have to tell that 'to the other member'?
Vaniuschka from Novosobirsk city or good englishspeaking senior from USA??