TESORO GOLDEN SABRE

[cristiano.sar]

Does anyone have diagram for wiring coils for the tgsl?

In the following document you have all info:
TGSL_101 _PART1.pdf

[growdude]

I cant download for some reason

[mostafalesnar91]

I forgot the precise specs, but I think that 071 is not good substitution for LM308.

Hello, I am looking for a ready-made loop for tgsl. Among the new metal detectors such as Minelab, Nokta, Garrett, etc., is there a loop that is compatible with the tgsl metal detector?

[Silver Dollar]

Unfortunately that's the Tesoro that is TX-5.7mH RX-6,2mH. Tesoro made quite a few like that (Lobo was Different). The only other coil that matched was Troy Shadow X2...

[mostafalesnar91]

Unfortunately that's the Tesoro that is TX-5.7mH RX-6,2mH. Tesoro made quite a few like that (Lobo was Different). The only other coil that matched was Troy Shadow X2...

Do you know what the problem is? Tesoro considers the inductance of both the transmitter and receiver coils to be high, while I checked the new loops and I noticed that they always consider one of them to be low, usually the transmitter!! For example, Nokta Impact im28 loop has the following specifications: Tx=0.590mh>>>>low Rx=6mh>>>>high Rx IMPACT=Tx TESORO I used this loop and I will post the test videos.

[Silver Dollar]

If your willing to tune it then any coil without caps inside can be used. I accidentally bought a Prism 950 to use on my IDX but luckily it doesn't have caps in it so it can be tuned...

[mostafalesnar91]

C6=15nf

[mostafalesnar91]

C6=220nf

[mostafalesnar91]

Unfortunately, Impact Loop is not compatible with Tesoro. In this video, I connected the Impact receiver to the TGSL transmitter