felezjoo PI(the best pulse induction metal detector that I made until now)

[jladre]

SMD fpi.. enjoy

[6666]

Hi Jladre
glad to see you are still around, did you ever gather enough materials to wind another coil to show how you made it ?
or even if the former is just cardboard for a demonstration thanks.

[samii]

Hello
for usbasp connection board to atmega328p

http://www.instructables.com/id/AVR-Target-Board/

I simplified it for only 28 pin attached lay6 and pdf

New folder (8).rar

[kadir6141]

Hİ friend.How is it going to be very fuse

[pigeon]

smd

SMD fpi.. enjoy

[barwildi]

SMD fpi.. enjoy

jladre,

Nice and neat, I like it!

Just curious - what is the PCB size of this SMT version?

B

[freso]

Be sure to used the latest version..it is supported and very easy to use. Easiest of all programming software in the net.

mkAVR...... do you have full version because free version dont aloow me to burn into atmega328p-pu and i cant find 328p in extrem burner i am kinda lost..... iam begginer sorry

[samii]

extreme burner
version 1.4.3

try download this it has 328p pu

[mikipn]

https://dl.dropboxusercontent.com/u/....4.3_setup.exe

[freso]

thanx mine was 1.4.2 that's why

[freso]

https://dl.dropboxusercontent.com/u/....4.3_setup.exe

thank you for the link hope the burning will go well

[freso]

first thank you people for help i burned the hex file using usbasp that contains 2 jumper holes and set the correct fuses in extrem burner click on write all.... now i cant read or write anymore to the ship... i used this simple connection beetwen atmega and usbasp http://arduino.ru/sites/default/file...ega328p-pu.jpg help what's wrong
this man had the same problem Can't read/write to/from the atmega328p

[freso]

extreme burner
version 1.4.3

try download this it has 328p pu

help.............first thank you people for help i burned the hex file using usbasp that contains 2 jumper holes and set the correct fuses in extrem burner click on write all.... now i cant read or write anymore to the ship... i used this simple connection beetwen atmega and usbasp http://arduino.ru/sites/default/file...ega328p-pu.jpg help what's wrong
this man had the same problem Can't read/write to/from the atmega328p i think atmega is dead....... help

[samii]

Maybe you locked fuse by checking lock fuse on extreme burner menu.Buying a new atmega is easy solution.

http://mdiy.pl/atmega-fusebit-doctor-hvpp/?lang=en is hard solution if fuse bit locked.

[reptooyep]

help.............first thank you people for help i burned the hex file using usbasp that contains 2 jumper holes and set the correct fuses in extrem burner click on write all.... now i cant read or write anymore to the ship... i used this simple connection beetwen atmega and usbasp http://arduino.ru/sites/default/file...ega328p-pu.jpg help what's wrong
this man had the same problem Can't read/write to/from the atmega328p i think atmega is dead....... help

Hi,
The problem is simple. When you burn the fuses of the chip, it's now set to be used with a high speed quartz.
If you want to program it again, you have to cable the chip with a quartz an 2 18pF capacitors on a project board or etch a small programming board.
I can share my simple programming interface
programmateur avr.zip