Delta Pulse

[szucs_g]

This is 2 sided version. Nice work! Congratulation! We waiting for your project ending. :-)

[szucs_g]

Is this full or demo version?

[labtec1]

[labtec1]

[labtec1]

Hello everyone
I finally made the PCB and mount today.
Question for all that is the final revision of the list of parts ii percent do not know which is good because there are a lot in the forum. thanks

[szucs_g]

Sorry. I found it. #1474

[szucs_g]

Good work! Congratulations!
Please send me the LCD schematic (the discriminatior type).
This is my Delta.

Thanx!

[Nicolas]

Thanks Jap for generous assistance
this is my Delta without 32cm coil
[ATTACH=CONFIG]21650[/ATTACH]
[ATTACH=CONFIG]21651[/ATTACH]
this is with previous c4 and c6 ceramic caps

Hi Nikolov

Good work

[Nikolov]

Thanks Jap for generous assistance
this is my Delta without 32cm coil


this is with previous c4 and c6 ceramic caps

[jap]

OK
25cmX35cm alu sheet on 110cm
alu can 1L on 75cm
coin on 30cm --for coin I have Spectrum Eagle

THE END

P.S. Thank you very much FRIENDS

Hi Nikolov
good,,, if u result with 35cm coil ,,,,u have good coil+dp
best time
j.

[sakis1]

Hi sakis1
HEX file for the descrimination in TEXT
best time
j.

THANKS

[Nikolov]

OK
25cmX35cm alu sheet on 110cm
alu can 1L on 75cm
coin on 30cm --for coin I have Spectrum Eagle

THE END

P.S. Thank you very much FRIENDS

[pigeon]

Hi pigeon
-for only red led work it is true--the green led work when descrimination when conection to delta .
-(reprogramming hex and test)
- test conection pin of data may the error from.



- if lcd conection is OK (in that case must lcd light ).

Hi sakis1
-For HEX file for the descrimination read reply #1689.

best time
j.

ok jap.
thank you very much

pigeon.

[jap]

no it can not open the downloaded file/locked or empty/you can upload it for me;Even as τχτ*

Hi sakis1
HEX file for the descrimination in TEXT
best time
j.

[sakis1]

no it can not open the downloaded file/locked or empty/you can upload it for me;Even as τχτ*